-
Calcined Petroleum 5-25mm Coke For metallurgical Industry
Black silicon carbide (SIC) is made from quartz sand and carbon (anthracite coal tar or petroleum coke) in electric esistance furnace at high temperature. It has the characteristic of high hardness, excellent electrical and heat conductivity, low thermal expansion, and high abrasion resistance. Thus, SIC is the most suitable material of abrasives, refractories, deoxidizer of metallurgical, special ceramics, electric heating elements and so on.
Send Email Details -
High quality Black Granular Silicon Carbide For Foundry
lack Silicon Carbide Technical Data: --High thermal conductivity rating of 100 W/m-K. --Extremely hard: Mohs 9.1 or 2550 Knoop. Harder than aluminum oxide --Blocky grain, will splinter as it breaks down, fast cutting speeds, great for recycling --High strength at elevated temperatures. --Great for glass frosting & engraving, stone carving & etching, rock tumbling --Grades 16 through 1500 available
Send Email Details -
98% Black Sic Silicon Carbide for Abrasive Industry
Silicon Carbide (SiC) has properties remarkably similar to those of diamond – it is one of the lightest, hardest, and strongest advanced ceramic materials and has exceptional thermal conductivity, resistance to acids, and low thermal expansion. Silicon Carbide is an excellent material to use when physical wear is an important consideration because it exhibits good erosion and abrasive resistance, making it useful in a variety of applications such as spray nozzles, shot blast nozzles, and cyclone components.
Send Email Details -
High Purity 90% Sic Silicon Carbide for Cast Iron Products
Silicon carbide itself is not hazardous, but the dust produced during grinding or sanding can be harmful if inhaled. Using appropriate protective gear like masks and ensuring good ventilation when working with silicon carbide in powder form or during activities that generate dust is important. Always follow safety guidelines and use the material in well-ventilated areas.
Send Email Details -
Manufacturers Black silicon carbide powder is in stock
Silicon Carbide (SiC) has properties remarkably similar to those of diamond – it is one of the lightest, hardest, and strongest advanced ceramic materials and has exceptional thermal conductivity, resistance to acids, and low thermal expansion. Silicon Carbide is an excellent material to use when physical wear is an important consideration because it exhibits good erosion and abrasive resistance, making it useful in a variety of applications such as spray nozzles, shot blast nozzles, and cyclone components.
Send Email Details -
90% SIC To Replace Ferro Silicon For Ductile Iron Casting
(1) Large melting furnace, longer melting time, lead to more crystallization, bigger crystals, higher purity and less impurities. (2) Good hardness, longer life. (3) Chemical washed and water washed good cleanness. (4) Special treated products get higher purity, better toughness, and better grinding effect.
Send Email Details -
1-10mm 90% SIC For Steel Making And Foundry
Silicon carbide, also known as Emery, is made of quartz sand, petroleum coke (or coal coke) wood chips and other raw materials through high temperature smelting resistance furnace, In nature, silicon carbide also exists a rare mineral,mosanite.Silicon carbide is also known as carbonosilicate.
Send Email Details
