-
Factory spot supply the pre-baked carbon anode block for aluminium
Prebaked anode bonded by phenolic resin is featured with low porosity, high bulk density, good molten aluminum resistance and high temperature resistance. Due to enhanced heat conductivity property, slag off phenomenon happened on anode can be reduced significantly, which helps to elongate 3 to 5 days service life of anode. Besides that, purity of molten aluminum can be improved from 99.7% to 99.8% basing on our test data.
Send Email Details -
Hot
Steel Casting Carbon Graphitized Petro Coke
Steel Casting Carbon Graphitized Petro Coke as the inoculant and carburizer, it's widely used in the special steel smelting and precision casting process, especially meeting the requirement of high quality product and strict control of sulfur content in the ductile iron and grey iron casting industry. Steel Casting Carbon Graphitized Petro Coke also used as reducer agent in the nuclear reactor, the absorbent of heavy metal in the waste water treatment system and the raw material of graphite cathode in the aluminum electrolysis cell.
Send Email Details -
Hot
Carbon Raiser Graphite Petro Coke For Iron Casting
1. Fixed carbon>98.5% Sulphur<0.05% Nitrogen<0.03% Ash content<0.74 Volatile<0.8% 2. Fixed carbon>98.5% Sulfur < 0.1% Nitrogen < 0.03% Ash content < 0.74 Volatile < 0.8% 3. Fixed carbon > 98.5% Sulfur < 0.3% Nitrogen<0.1% Ash<1% Volatile< 0.5%
graphite carbon for iron casting Iron casting carbon raiser best carbon raiser artificial graphite petro cokeSend Email Details -
Hot
Steelmaking Gray Iron Production Calcined Pet Coke
Recommend other inorganic fluorine chemical products: 1. calcined petroleum coke powder / granular 2. Graphite Petroleum Coke/Graphitized Petroleum Coke 3. coke powder / granular 4 Steelmaking Gray Iron Production Calcined Pet Coke
Send Email Details -
Hot
CPC|Calcined Petroleum Coke Used As Recarburizer
CPC is suitable for use in an induction furnace melting, using a slightly different method according to the specific process requirements of each unit. (1) Intermediate frequency electric furnace smelting,can add into the furnace in the lower part according to the ratio of carbon equivalent requirements or material with the recovery rate up to 95%. (2)After melting is completed,if the carbon content isn't enough that needs to adjust, first remove furnace slag,then add carbon agent, through heating up of molten iron by electromagnetic stirring or artificial stirring to dissolve the carbon to be absorbed with the recovery up to 90%. If apply low temperature carbon growth process, that only part of charge is melted with lower melting temperature of molten iron,then add all recarburizer in liquid iron, also with a solid charge pressed it into liquid iron do not let it exposed on the surface.In this method it can reach more than 1.0% carbon of iron liquid
Send Email Details -
Graphitized Carbon Raiser For Foundry Casting
1.Carbon additive for steel-making. 2.Recarburizer for gray cast iron and ductile cast iron. 3.Brake pads additive materials as friction material .
Send Email Details -
Customized Calcined Pet Coke For Chemical Industry
Usage: 1. Steel manufacturing industries 2. Aluminum melting industries 3. Titanium oxide manufacturing industries
Send Email Details -
Calcined Pitch Coke For Casting Manufacturer
1--5mm Calcined Pitch Coke may substitute massively refinery coke or the stone grinds. Meanwhile 1--5mm Calcined Pitch Coke cost is much less than the refinery coke and the stone grinds. 1--5mm Calcined Pitch Coke may also use as the fuel, for 1--5mm Calcined Pitch Coke calorific value may achieve over 9386K/KG. 1--5mm Calcined Pitch Coke may substitute burnt carbon massively.
Send Email Details
