-
90% SIC To Replace Ferro Silicon For Ductile Iron Casting
(1) Large melting furnace, longer melting time, lead to more crystallization, bigger crystals, higher purity and less impurities. (2) Good hardness, longer life. (3) Chemical washed and water washed good cleanness. (4) Special treated products get higher purity, better toughness, and better grinding effect.
Send Email Details -
0-1mm SIC Silicon Carbide For Refractory Industry
1. Silicon carbon can be used as metallurgical deoxidizer and high temperature resistant materials in smelting. 2. Silicon carboncan also be used as abrasive materials,which can be used to make abrasive tools,such as grinding wheels, oilstones, grinding head and so on. 3.Silicon carbon is a new kind of reinforced steelmaking deoxidizing agent and ideal thermal insulating agent.it is used for deoxidizing. The usage dose is 14kg/t can make electricity consumption to reduce 15-20kw/h and time to reduce 15-20min per furnace to raise productivity rate to 8-10%.
Send Email Details -
98% SIC Silicon Carbide For Abrasive Industry
98% SIC Silicon Carbide For Abrasive Industry is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw materials. The hardness of 98% SIC Silicon Carbide For Abrasive Industry is between fused alumina and synthetic diamond. Mechanical intensity of it is higher than fused alumina. It is sharp and has electrical and heat conductivity in some degree.
Send Email Details -
Ceramic SIC Silicon Carbide For Functional Ceramics
Ceramic silicon carbide is brittle and sharp. It has a good electrical and heat conductivity. Its Knoophandness is 3100-3280kg/mm2. Grinding wheels made of C are suitable for the grinding of metal and nometalic materials of low tensile strength such as grey cast iron, brass, aluminium, stone materials, leather and rubber etc. Moreover, Ceramic silicon carbide can also be used in the manufacture of refractory products and electric products etc.
Send Email Details -
90% SIC Metallurgy Grade Silicon Carbide
1.90% SIC Metallurgy Grade Silicon Carbide can be used as metallurgical deoxidizer and high temperature resistant materials in smelting. 2. 90% SIC Metallurgy Grade Silicon Carbide can also be used as abrasive materials,which can be used to make abrasive tools,such as grinding wheels, oilstones , grinding head and so on.
Send Email Details -
1-10mm 90% SIC For Steel Making And Foundry
Silicon carbide, also known as Emery, is made of quartz sand, petroleum coke (or coal coke) wood chips and other raw materials through high temperature smelting resistance furnace, In nature, silicon carbide also exists a rare mineral,mosanite.Silicon carbide is also known as carbonosilicate.
Send Email Details
